LB-3315 Double Person Infectious Disease Portable Test Sampling Booth

LB-3315 Double Person Infectious Disease Portable Test Sampling Booth

1.Infectious Disease Portable Test Sampling Booth performance features:

Infectious Disease Portable Test Sampling Booth

1) UV lighting sterilization, can be timed to achieve automatic disinfection of people walking.

2) equipped with primary filtration device and anti-virus high-efficiency air filtration system, 0.3μm particle size filter efficiency ≧ 99.995%.

3) Universal casters with brakes, easy to move and dock.

4) positive pressure design of the cavity, blocking the inflow of external germs into the cavity.

5) internal air supply volume ≧ 900m³ / h.

6) Constant temperature control of the cavity, with hot and cold dual system air conditioning.

7) equipped with a transfer port, the size can be customized.

8) Dual-station operation, more convenient and humane.

9) Dedicated power distribution box, easy to operate and safe to use.

10) Self-contact infrared body temperature measurement function, intelligent voice broadcast, convenient and quick temperature measurement. (Optional)


2.Infectious Disease Portable Test Sampling Booth Parameters:

Infectious Disease Portable Test Sampling Booth Methods.jpg

1) Case size (external) 2100mm*1400mm*2800mm

2) Case size (internal) 2000mm*1300mm*2000mm

3) High-quality thermal insulation board of casing material

4) Observation window material acrylic (plexiglass)

5) Sterilization system UV ultraviolet lamp sterilization time: 30 minutes to 60 minutes is appropriate

6) Air supply system FLJ power frequency centrifugal blower

评论

发表评论

此博客中的热门博文

Advantages of QINSUN protective clothing Antisynthetic blood penetration tester

图片
Advantages of QINSUN protective clothing Antisynthetic blood penetration tester QINSUN protective clothing Antisynthetic blood penetration tester test principle： Through the micro flow pump, see-through type constant temperature water bath, water bath type measurement chamber to form a closed-loop loop, the sample through the split flange clamped in the middle of the measurement chamber and trapping chamber, the sample placed on both sides of the tetrafluoroethylene gasket, split flange and measurement cell contact position installed with silicone executive ring and protective gasket, operation by adding the chemical to be measured to the measurement chamber, the chemical through the sample penetration to the trapping chamber complementary trapping liquid captured and with In principle, the flow rate should not be too large or too small, but about 5 times the volume of the trapping liquid, which is calculated by the analysis electrode. QINSUN protective clothing Antisynthetic blood pen...
阅读全文

Masks Bacterial Filtration Efficiency (BFE) testing equipment test procedure

图片
Masks Bacterial Filtration Efficiency (BFE) testing equipment test procedure:   1. Start the instrument and perform air cleaning.   2. Install the Staphylococcus aureus solution, start the peristaltic pump and supply the solution to the tip of the sprayer.   3. Install the mouthpiece sample in A-way, B-way as positive QC, and install the flat dish into the Anderson sampler.   4. Set instrument parameters.   5. Remove the sampled flat dishes, mark the layer number and place them in the incubator to count the positive pore count values for each layer of the plate. 6. Calculate the result, BFE=(positive QC average - sum of experimental sample counts)/positive QC average*100%  
阅读全文

A mask test in Japan: wearing this way, the “leakage” rate of external bacteria is 100%

图片
Masks can help us block the virus, but if they are taken off and worn improperly, their protective effect will be greatly reduced. A program on MBS TV in Japan did a test and found that the wrong way to wear the mask will greatly reduce the filtering effect of the mask. Here are the 4 most common mistakes in taking off and wearing masks, and teach you how to use them correctly to make masks more effective in protection. 4 wrong ways to take off masks: 1. Does not fit the face completely There is a gap between the mask and the face, and when a person breathes, the airflow will flow to the gap. This program on Japanese MBS TV had a woman wear a mask that did not fit her face. Doctors use special equipment to measure the probability of harmful substances in the air on the outside of the mask entering the inside of the mask through the gap. The test found that the external bacteria leakage rate reached 100%. That is to say, there is a gap between the mask and the face, which will seriously...
阅读全文